DN15-DN50 Motorized Ball Valve 2-Wire/3-Wire Waterproof IP65 2-Way/3-Way Electric Water Valves Female Thread 12V 24V 220V

Product description:

Motorized Ball Valve consists of valve body and actuator. and the actuator drives the valve core to rotate 90°, The actuator is driven by a synchronous motor and has built-in limit contacts, which can make the valve power off when it is fully open or fully closed. It has the advantages of IP65 waterproof, simple structure, reliable operation, large straight-through flow, energy saving, and can replace solenoid valves. It can be widely used in heating, central air conditioning, solar water heating system, water treatment system cold and hot water switch control.

Specification

Applicable medium: cold, hot water or 50% glycol solution

material: Brass,flame-retardant PC material

Control method: CR02(Three wire two control), CR03(Three-wire one-control), CR04(Two-wire power-off reset)

Way: Two way/Three way (three way is T type)

Driving voltage: AC220V, DC24V, DC12V, 50/60Hz

Power: 6W (only when the valve is opened and closed)

Waterproof level：IP65

Drive torque: AC220V 8 N.M, DC12/24V 6 N.M

Running Time: 5-15s

Nominal pressure: 1.6 MPa

Applicable medium temperature: 0-95℃

Applicable ambient temperature: 0-65℃

Lead length: 30 CM

Connection method: G internal thread

Notice:

1.If you need an L-type three-way valve, please contact customer service separately!!!

2. The more you order, the more offers, please contact us

3. Package list: Valve*1

Wiring diagram of electric ball valve

1. SW is connected to the OPEN, the valve is open, internal automatic power off after in place, the valve remain fully open position.

2. SW is connected to the CLOSE, the valve is closed, internal automatic power off after in place, the valve remains fully closed position.

1. SW is closed, the valve is open, internal automatic power off afterin place, the valve remain fully open position.

2. SW is disconnected, the valve is closed, internal automatic power offafter in place, the valve remains fully closed position.

1.When the SW is closed, the valve opens/closes; after the positionisin place, the internal power is automatically cut off, the valve remainson/off and the backup power is charged.

2.When the SW is disconnected, the valve is closed/opened; after thepositionis in place, the internal power is automatically cut off, the valveremains closed/open.