Lug vs Wafer Butterfly Valve – Lug Type Butterfly Valve Supplier | ZECOgear operated butterfly valve

2″ gate valve

2 pvc check valve

1 1/2 check valve

npt port

apollo flanged ball valve

1/2 check valve

Butterfly valves have been around for a long time, and are used for a variety of applications. They made their first appearance during the 1930s, and have been utilized by several industries ever since. Often made out of cast steel or cast iron, butterfly valve’s name is based from the functionality of its disc.

Table of Contents

• What is a Butterfly Valve?
• How does a Butterfly Valve work?
• Types of Butterfly Valve According to End Connection
  • What is a Lug Type Butterfly Valve?
  • What is a Wafer Butterfly Valve?
• Lug vs Wafer Butterfly Valve

What is a Butterfly Valve?

Butterfly valves are classified as “quarter-turn” valves. When the metal disk that’s part of the valve’s design is rotated a quarter of a turn, it opens or closes. The disk, referred to as the “butterfly” is attached to a rod.

How does a Butterfly Valve work?

When the butterfly valve is opened all the way, the disc rotates (a 1/4 turn), allowing for a nearly unrestricted passing of the fluid. You can also open the valve gradually to reduce flow. Turning the butterfly (disk), to close the valve, blocks the passage of the fluid. This is due to the disc always being perpendicular or parallel to the flow, resulting in a pressure decrease regardless of the position it is in.

Types of Butterfly Valve According to End Connection

There are a few different types of butterfly valves, however, they fall into two basic types: lug type butterfly valve, wafer butterfly valve and flange butterfly valve.

What is a Lug Type Butterfly Valve?

The lug type butterfly valve’s design is similar to a 3-piece ball valve in that one end of the line can be taken off without having an effect on the opposing side. This can be executed by using threaded inserts, flanges, along with two sets of lugs (bolts) that don’t utilize nuts since each flange features its own bolts. It’s also important to note that you don’t need to shut down the entire system in order to clean, inspect, repair, or replace a lug butterfly valve (you would need to with a wafer butter valve).

What is a Wafer Butterfly Valve?

A wafer butterfly valve’s function is to retain a seal to protect against dual-directional pressure differential in the flow of fluid. In other words, the wafer version of butterfly valves was designed to hold a tight seal, safeguarding against bi-directional pressure differential in order to avoid any backflow in systems that have been manufactured for uni-directional flow. This is accomplished by using a tightly fitted seal, such as an O-ring, gasket, precision machined, along with a flat valve face on the downstream and upstream sections of the valve.

Lug vs Wafer Butterfly Valve

Lug type butterfly valves use threaded tapped lugs to mount the valve to piping flanges using bolted connections. On the other hand, wafer butterfly valves don’t have attachment lugs. Usually, they have four holes to align with the connected piping. The valve is clamped in between two piping flanges.

A lug butterfly is suitable for end-of-line service but wafer butterfly valves can not be used for end-of-line services. In case there is a maintenance requirement on the line having water style butterfly valve, the entire line needs to be shut down.

Wafer butterfly valves are lighter and cheaper as compared to lug type butterfly valves.

Both lug butterfly valve and wafer butterfly valves are used in a number of applications for industrial sectors that include food processing, pharmaceutical, chemical, oil, water as well as waste water management. The valves utilized in these industries are generally manufactured in compliance with API 609 Standard.

Butterfly valves for the most part have replaced ball valves in a lot of industries. This is especially the case for those dealing with petroleum because of they are less expensive and easy to install.

It’s important to note that pipelines that contain butterfly valves can’t be “pigged” for cleaning. “Pigging” is the process of making use of devices referred to as “pigs” to carry out a variety of maintenance operations.

Related Tags :

ZECO Valve

NBR Butterfly Valve

Shanghai Pressure Reducing Valve Factory

What are Globe Valves?

Manual Operate Gate Valve Manufacturer

Gate Valve vs Ball Valve

Globe Valve vs Ball Valve

Difference Between Gate Valve And Butterfly Valve

Ten articles before and after

Six Solutions to Solve Leakage of Electric Regulating Valve – Zeco |API Approved Valve Supplier

Welcome to Zeco “Bo Bing”Activity – Zeco |API Approved Valve Supplier

Selection Principles of Butterfly Valves – Zeco |API Approved Valve Supplier

Global Industrial Valve Market Expand – Zeco |API Approved Valve Supplier

Newly Manufactured and Shipped Valve Products – Zeco |API Approved Valve Supplier

Global Industrial Valves Market Is Set for a Rapid Growth – Zeco |API Approved Valve Supplier

New Hydrogenated High Pressure Orbit Ball Valves – Zeco |API Approved Valve Supplier

Материал клапана – Zeco |API Approved Valve Supplier

Great Potential for Valves in the Vietnam’s Market – Zeco |API Approved Valve Supplier

Valve World Asia 2017 Suzhou – Zeco |API Approved Valve Supplier