1/2″ 3/4″ 1″ 2″ Brass Motorized Ball Valve 3-Wire 2 Control /Three-wire One Control Normally Closed Electric Ball Valve

Specification

Medium: Cold/hot water, 60% Ethylene Glycol

Material: Brass

Power Supply: AC220V/DC12V/DC24V

Structure Forms: Two Ways,

Operation Mode: Three Wire Two Ways Control/Three-wire One Control mode/2-wire, (power-off reset mode)

Power: 6W (Only when the valves open and close)

Running Time: 5-15 Seconds

Nominal Pressure: 1.6MPa

Medium Temperature: 2°~95°

Maximum Differential Pressure: 1.0MPa

Connection Mode: G Internal Thread

Torque：220V 8 N.M, DC12/24V 6 N.M

Waterproof level：IP65

Package list: 1PC* Ball Valve

CR02: 3-wire, (three-wire two-control mode) wiring diagram

Voltage: AC220V, DC12V, DC24V

1. The SW is connected with OPEN, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve remains in the open state.

2. The SW is connected with CLOSE, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in the closed state.

CR03: 3-wire, (three-wire one control mode) wiring diagram

Voltage: AC220V,

Remarks: If the power supply is a DC power supply, the red wire needs to be connected to the positive pole, and the green wire needs to be connected to the negative pole.

1. The SW is closed, the valve is opened, and the internal power is automatically cut off when it is in place, and the valve is kept in a fully closed state.

2. The SW is disconnected, the valve is closed, and the internal power is automatically cut off when it is in place, and the valve is kept in a fully closed state.